Best Way To Germinate Auto Weed Seeds

ILGM

Buy Cannabis Seeds Online

If you're looking for ways to germinate your autoflowering cannabis seeds quickly, here are 5 EASY METHODS used by professional growers. Germinating cannabis seeds is important because it gives the grower an advantage in cultivation and it speeds up the process Growing your own autoflowering cannabis is easy, cost-efficient, and produces fast results. As you can see, sprouting autoflowering seeds is easy and produces rapid results.

Best Way To Germinate Auto Weed Seeds

5 Easy Ways to Germinate Autoflower Seeds Quickly!

Table of content

Are you looking for ways to germinate autoflower seeds quickly? If so, you’re in luck! In this blog post, we’ll share five easy ways to do just that.

How to Germinate Autoflower Seeds Quickly!

If you’re looking to germinate your autoflower seeds quickly and easily, there are a few simple steps you can take.

The first step is to soak the seeds in water for at least 12 hours. This will help to soften them and increase their chances of germination.

Once the seeds have been soaked, you can start the germination process by placing them in a warm, moist environment. You can either place them in a pot of water or soil, or you can put them in a warm oven.

Be sure to keep an eye on your seeds and water them as needed. Once they’ve germinated, you can transplant them into soil or a pot.

The Best Way to Germinate Autoflower Seeds

There are a few ways to germinate autoflower seeds quickly. The most common way is to soak the seeds in water overnight, then drain and place them in a warm, moist environment. additionally, you can also place the seeds in a wet and warm, sunny spot.

The Worst Way to Germinate Autoflower Seeds

There are a few ways to go about germinating autoflower seeds, but all of them have their own disadvantages. The most common way is to put the seeds in moist soil and leave them there for several weeks, though this can be time-consuming and unpredictable. Another option is to warm the soil up before planting the seeds, but this also has its risks. Finally, you can try to germinate the seeds by exposing them to direct sunlight or warmth, but this method is often unsuccessful.

5 Easy Ways to Germinate Autoflower Seeds Quickly!

There are a few quick and easy ways to germinate autoflower seeds. The following options can help you get your plants up and growing in no time!

Option 1: Soak the Seeds in Water for 24 Hours If you have soaked the seeds overnight, simply give them a quick rinse before placing them into water again. The soaking process will help to soften the seed coat, which makes it easier for them to absorb water and begin germination.

Option 2: Place Them on a Warm Plate or in Warm Water Some growers find that heat speeds up the germination process. You can place the seeds on a warm plate or soak them in warm water for a couple of hours. Just be careful not to overheat. The warmth will also help set the seed embryo into action.

Option 3: Rinse Them with Coldwater for 30 Seconds Once They Germinate After soaking or Placing on Warmer Temperature Simply rinsing the seeds with cold water after they germinate will stop any seed splitting that may occur and ensure that all of the embryos are activated. This is an easy way to speed up your crops growth if you don’t have much time available!

Do you germinate autoflower seeds in the dark?

There are many ways to germinate autoflower seeds, but some people prefer to do so in the dark. This is because some light can inhibit the growth of the plants. If you want to germinate your autoflower seeds in the dark, you can use a black light or a fluorescent light.

How long does it take for an autoflower seed to germinate?

What is the ideal germination temperature for autoflower seeds?

There is no one definitive answer to this question, as the time it takes for autoflower seeds to germinate will vary depending on a variety of factors including the type of autoflower seed, soil temperature and humidity, and light exposure. However, most experts recommend germinating autoflower seeds in a warm, moist environment between 68-77 degrees Fahrenheit.

What is the ideal media for autoflower seed germination?

How long does it take a autoflower seed to germinate?

The ideal media for autoflower seed germination is a moist, well-aerated mix with good drainage. Some growers swear by perlite, sand or vermiculite; others prefer soil. Be sure to add enough compost or fertilizers to make up for the lack of organic matter in the potting medium. Seeds should be spaced about 1″ apart when growing cannabis seeds indoors.

What are the best methods for germinating autoflower seeds?

When it comes to germinating autoflower seeds, there are a few different methods that people use. The two main ways are by using light or by using heat. Some people even try to germinate their seeds in the dark, but this is not always successful. Here are some tips on how to germinate autoflower seeds successfully:

Start with fresh autoflower seeds. Older ones will not germinate as quickly and may even end up being unproductive.

Fill a container halfway with warm water and add the desired amount of your autoflower seed mix. Soak for 12 hours, then drain and place the seedlings into a fresh pot of water. Add more water as needed.

Place the pot in a sunny area and allow the seeds to soak up as much sunlight as possible. Do not cover them with plastic or they will get too hot and may not germinate.

Once you see germination taking place, gradually move the pot into darker areas of the garden and water regularly. When the plants have grown several inches high, they are ready to be transplanted into soil or Peters seed starting mix.

Be patient – germination rates vary widely among autoflower varieties, so don’t be discouraged if yours take a little longer than normal to sprout.

How can I tell if my autoflower seeds have germinated?

It can take a few days for autoflower seeds to germinate, but there are some things you can do to speed up the process. One easy way is to place the seeds in moist soil and cover them with soil or plastic wrap. If you’re growing indoor plants, set out a small pot of moistened soil next to your plant, and cover the autoflower seeds with half of it. You can also water them frequently; just don’t allow the soils to stay wet for too long or they will rot. Another method is to place the autoflower seeds in a warm water bath; this will help soften them so they will germinate more quickly.

The Paper Towel Method

The paper towel method is a quick and easy way to germinate autoflower seeds. Simply place the seeds on a damp paper towel and fold the towel up so that the seeds are covered. Leave the towel folded for about 12 hours, or until the seedlings have emerged.

Direct Planting

Planting Directly Into the Ground

Direct planting is a great way to get your autoflower seeds started quickly. By planting directly into the ground, you bypass the need for a soil medium and can get your plants up and growing much faster. There are a few things to keep in mind when planting direct:

Make sure the soil is moist before planting.

Make sure the seeds are covered with soil.

Make sure the plant is positioned in a sunny spot.

Water the plants regularly, especially during the early stages of growth.

Planting Into a Pot or Container

Direct planting into a pot or container is a great way to get your autoflower seeds started quickly. Simply remove the seeds from their packaging, moisten them, and place them into the pot or container. Make sure the soil is moist but not wet, and then cover the seeds with soil. Keep the pot or container in a warm, sunny spot and watch as the seeds germinate!

See also  What Are Feminized Cannabis Seeds

Planting Autoflower Seeds Indoors

If you’d like to try planting autoflower seeds indoors, there are a few different methods you can use. One is to place the autoflower seeds in moistened soil and cover them with plastic or a piece of paper towel. Place the container in a warm area and let the seeds germinate; they should be ready to transplant eight to sixteen days after being planted. Another option is to start your plants from cuttings taken from young plants; this will give you more control over how many plants you end up with, but it will take longer for the plants to reach maturity.

Outdoor Planting of Autoflower Seeds

Direct Planting of Autoflower Seeds:

Soak the autoflower seeds in water overnight. This will help to hydrate the seeds and increase germination rates.

When you’re ready to plant your seeds, use a tiller or a hand fork to break up the ground around them.

Water your plants regularly while they are growing; allow the soil to dry out between waterings. And be sure to fertilize them regularly with a strength appropriate for their stage of growth – early blooming auto varieties may require higher concentrations of nitrogen, while late flowering strains will benefit more from phosphorus and potassium.

Starter Cubes and Seedling Plugs

If you’re looking to get started with autoflowering cannabis seeds, it can be helpful to have some starter cubes or seedling plugs on hand. These little tools help you germinate your seeds quickly and easily, so you can get growing right away.

To use a starter cube, simply soak the cubes in water for a few hours or overnight. Then, place them in a warm place (between 70 and 80 degrees Fahrenheit is ideal) and wait until they germinate. Once they do, remove the cubes and plant them into soil.

To use a seedling plug, simply place the plug into water for a few hours or overnight. Then, place it in a warm place (between 70 and 80 degrees Fahrenheit is ideal) and wait until it germinates. Once it does, remove the plug and plant it into soil.

Overnight Soaking

Soak Your Seeds in Water Overnight

Overnight Soaking for Autoflower Seeds:

Growing autoflowering seeds can be a tricky process, but with some preparation and patience, you’ll be rewarded with healthy plants that yield thick, bountiful harvests. To start off the Growing Process successfully, it’s important to germinate your seeds in the right way and environment. One of the simplest methods for germination is soaking them overnight in water. In this guide we’ll go over 5 easy steps to help you get started with this method quickly!

Place Your Seeds in a Warm, humid Environment

If you’re looking to speed up the germination process of your autoflower seeds, soaking them overnight is a great way to do it. Simply place the seeds in a bowl or container of warm water, and let them soak for at least 12 hours or up to 24 hours. After soaking, you can either place the seeds in a warm, humid environment.

Use a Seed Germination Kit

If you’re looking to germinate your autoflower seeds quickly, then you’ll want to consider using a seed germination kit. These kits come with everything you need to get started, including instructions and fresh (or frozen) media.

Check on Your Seeds Regularly

If you’re growing autoflowering cannabis seeds, it’s important to check on them regularly to make sure they’re germinating. Overnight soaking is a great way to do this. Simply place the autoflower seeds in a bowl or container, fill it with water, and let them soak overnight. The next day, you can check to see if they’ve germinated by removing a few of the seeds and placing them in a moist paper towel. If they start to grow, the process is complete.

A Germination Station

If you’re looking to germinate your autoflower seeds quickly and easily, you’ll want to invest in a good germination station. There are a variety of options available on the market, so it’s important to find one that will fit your needs.

Some of the most popular germination stations include trays with holes in the bottom, peat pots, and soil blocks. Each has its own advantages and disadvantages, so it’s important to choose one that will work best for your seeds.

One of the most important factors to consider when choosing a germination station is the temperature. Autoflower seeds need a warm environment to germinate, so make sure the station you choose has a warm surface.

Another important factor to consider is humidity. Autoflower seeds need high levels of humidity to germinate, so make sure the station you choose has a moist environment.

Finally, make sure the station you choose has a light source. Autoflower seeds need light to germinate, so make sure the station has a light source that will reach the seeds.

In conclusion, there are many different ways to germinate autoflowering cannabis seeds. Some methods are better than others, but the most important thing is to find a method that works well for you. There is no one perfect way to germinate autoflower seeds, so experiment and see what works best for you.

How to germinate all types of cannabis seeds: Three methods

A seed is like an egg in many ways. Inside are very similar components: an embryo, a radicle, a plumule and cotyledons, and outside is a protective shell.

Germination is important because it gives the grower an advantage in cultivation and a faster start. And it makes sure you’re not planting a small rock where nothing will grow out of the ground.

The different types of cannabis seeds

For those who want to cultivate for recreational or medicinal purposes, the female plant is the only one that matters. Only she can produce the flowers we expect at the end of the cycle.

Cannabis is a dioecious plant, that is, it has a female and a male plant. The male flower produces pollen after calyx development, which, when it meets the flowers and pistils of a female plant, will be fertilized, generate a new seed, and guarantee the survival of the species.

Cannabis seeds have undergone several modifications and are currently available in three main categories: normal, feminized, and auto-flowering, also called automatic. Recently, a new category, quick flowering seeds, has gained popularity.

Regular or normal seeds

Regular seeds are mostly chosen by breeders and established growers seeking stable genetics. (Algirdas Gelazius/123rf)

If the cultivator’s desire is to perpetuate a variety or make improvements, he should choose seeds of the normal or regular type. They are created by crossing a male with a female plant.

We call them regular or normal because they develop naturally. This type of seed can produce species of both sexes. Here, the grower has no control over gender. The odds are divided. Regular seeds have a 50% chance of being a female plant and generating flowers, or 50% of being male, which will result in small bags which grow very quickly into clusters of calyxes and flowers with pollen grains, essential for the multiplication of the species.

Regular seeds are mostly chosen by breeders and established growers seeking stable genetics or new cannabis terpenes or profiles by pheno-hunting through regular seeds which become the mother stock for all feminized seeds. Traditional landrace growers continue a long tradition of growing flowers and pollinating their crops which lose commercial value but guarantee sufficient seeds for the next season. Traditional landrace growers are slowly disappearing from the most remote regions on earth due to feminized seeds and readily available hybrids seeds which fetch a higher commercial value.

  • Breed and create new strains
  • Equal probability of male and female plants
  • Create pollen bank
  • Sex of the plant is unpredictable
  • Male and female plants can be confused by a novice grower
  • Pollinating males will seed female plants, resulting in fewer flowers to be harvested by the grower
  • Preparation of different grow tents

Feminized seeds

Feminized seeds are obtained by crossing two female plants. One of them is exposed to a high level of stress. (Shutterstock)

In the late 1990s, with the need to cultivate seeds that guaranteed the appearance of female plants, feminized seeds emerged. As the name implies, they are those that will result in female plants. Males are unlikely to appear unless cannabis is under stress or someone has offered it a “cat for a hare.”

See also  Germinating Marijuana Seeds In Rockwool

In the beginning, these plants had quality problems or were genetically unstable. Furthermore, they could transform into hermaphrodite plants. Over the years, with improvements and new technologies, feminized seeds have achieved high levels of quality both in production and in taste and final effects.

Feminized seeds are obtained by crossing two female plants. One of them is exposed to a high level of stress until it becomes a hermaphrodite. After crossing them, feminized seeds are obtained.

Another method to get feminized seeds, and perhaps the most commonly used one, is the application of a solution of colloidal silver, a famous and easily found natural antibiotic. The solution placed on female cannabis plants induces the production of pollen, which fertilizes other female plants that will generate feminized seeds.

Feminized plants are photoperiodic plants and depend on hours of daily light to transition from the vegetative phase to the flowering phase. Photoperiod plants allow the grower greater control over the moment when the cannabis starts to flower by maintaining the light hours. Thus, growers can wait as long as necessary to remedy any problem with the plant still in its vegetative state, such as excess water or nutrients, or take clones or cuttings to ensure the survival of your favorite cannabis plants.

Less experienced growers should start with feminized plants until they get some experience. This is more likely to ensure that they are always healthy and within the correct growth parameters.

  • Production of female plants
  • Ideal for growers who want flowers
  • Simplification of the cultivation process
  • Not suitable for breeding
  • Must be started from the seed
  • Can turn into hermaphrodites

Automatic and autoflowering seeds

A few weeks after germination, autoflowering plants start flowering, regardless of the structure or health it presents at that time.(Shutterstock)

After feminized seeds, in 2008, automatic or autoflowering seeds appeared which were bred from Cannabis Ruderalis plants found in areas such as Eastern Europe, Russia, and Alaska. They flower in a shorter time, where there is no need for different photoperiods between the vegetative state and flowering, but they do require more attention.

Many people think that it is easier to cultivate, as it doesn’t need to change the photoperiod and the whole cycle happens in an “automatic” way. But not quite. A few weeks after germination, the plants start flowering, regardless of the structure or health it presents at that time. With that, the cultivator has no margin to correct eventual unforeseen events, such as excess or lack of nutrients, pests and diseases, and slow growth due to inadequate parameters.

  • No need to change photoperiod
  • Fast flowering time
  • Lower yield
  • Difficult and risky to clone
  • Little time for care

Photoperiodic plants have the advantages of greater control by the grower during the plant cycle, a richer THC and CBD profile, better terpenes and higher production. There is also the advantage of producing clones from a selection of mother plants.

Autoflowering plants, on the other hand, have a faster cultivation, more than one harvest can be made during the year and the possibility of cultivation with the light always on.

Type Male Female Possible to clone
Regular 50% 50% Yes
Feminized 0% 100% Yes
Automatic 0% 100% No

Sativas, indicas, or hybrids?

Firstly, you need to decide whether you want to use it medicinally or recreationally. Certain cannabinoids are more present in certain genetics.

The differences between indica and sativa plants are quite significant, such as the shape, height and even the effects. Their morphological differences are much greater than those attributed to them in dispensaries and in popular culture, however.

Indicas

Indica-predominant plants originally obtained from landraces in drier, more arid regions such as Afghanistan, Pakistan, and India have a shorter and more shrubby stature, a greater number of branches and a shorter space between nodes. This makes it a more compact and ideal herb to be grown indoors. They have a shorter flowering time, are easy to grow and especially under artificial light.

Indicas are more resistant to cold, require less water and do not handle high humidity well.

Sativas

Sativa plants originally obtained from landraces in tropical and higher altitudes have a greater height, a “pine tree” structure, and the space between their nodes is greater.

Flowering times are longer and are usually a little more difficult to grow. They don’t like the cold, are more heat resistant and better suited for outdoor use.

Hybrids

Nowadays seeds that are predominantly sativa or predominantly indica are landraces which are still available from select breeders and keepers of cannabis history. Hybrids are more common and have some characteristics of each variety.

How to check if my seed is ok?

The best seeds have a rounded shape, are big and fat. The closer your seed is to these characteristics, the greater the chances it will germinate. (Shutterstock)

There are a few ways to find out if your cannabis seed is ready to be germinated or not.

You can start by using your senses of sight, touch, and smell to determine if cannabis seeds are good or bad.

To test using vision, you can resort to using a magnifying glass. The best seeds have a rounded shape, are big and fat. The closer your seed is to these characteristics, the greater the chances it will germinate.

Bigger, harder seeds are best. The surface should have a slight sheen.

They are dark in color (usually brown, black, or gray). The darker the color, the more likely they are to grow and produce a better plant. The dark bark means they came from a better-quality plant.

If they are pale, white, or light green, they were picked too early and are probably immature. This means they are not good and are unlikely to germinate. If they are light-colored and dusty, they are probably old and slower to germinate.

Another tip is to check if the seed has light streaks. Good seeds are usually darker and some look like they have tiger stripes and are also referred to as tiger backs.

You can’t always judge a seed by its color alone. It is necessary to know what is inside the seed. If you break a seed and it is oily and moldy, it is spoiled. If it’s black inside, it means it’s fermented and won’t germinate.

Related Stories

Other tests that can be done to verify that a seed is in good condition is the touch test. Just lightly squeeze a seed. If crushed easily, it probably won’t grow well. There should be no small cracks or holes. If they have these characteristics, they probably won’t germinate. They must not be wrinkled or cracked. If they aren’t cracked, you know they’re intact. If it resists the susceptibility test, the seed has a good chance of germinating.

The other test consists of placing the seeds in a container of warm distilled water for two hours. If they sink, they’re good. If they float, they are premature and probably will not grow and therefore are unusable. Healthy seeds are heavy enough to sink or sink once a little water is absorbed.

How to germinate my seeds?

To germinate seeds, four simple elements are needed: humidity, warm temperature, oxygen, and darkness.

Most seeds germinate between 24 and 72 hours, but some may take longer.

There are several methods to germinate a seed. The first and best known is germination on paper (it can be on napkins, cotton, or paper towels). In a pot, place a sheet of kitchen paper, separate the seeds so that there is a few inches between them and add another layer of paper on top. Both sheets should be damp but not soaked. If the paper loses moisture, add a little more water. Once the white root reaches 2-3 mm, carefully transfer the seeds to the pot. Do not close the pot, as oxygen is essential for successful germination. (You may also consider soaking the seeds for a few hours before placing them in the paper towels.)

See also  How Much Do Marijuana Seeds Cost

Another method to germinate the seeds is with a glass of water, but it is not as effective as using paper. Place your seeds in a glass of water, preferably at a temperature of 22ºC. After 3-5 days, the seeds will start to open, and the small white radicle will appear. Then, just transfer to the soil already prepared to receive it. This is a simple method and suitable for first-time growers.

The grower can also place their seeds directly in the soil, in which case transplanting is not necessary. It is a safer option due to the fragility of the small root that appears when we germinate in a glass of water or on paper. Put the soil in the pot where your plant will be. Poke a hole to a depth between 10-15mm. Introduce the seed and gently cover it with more soil, but it is not necessary to compress it on top of the seed. Put some water on top to make the soil moist. After 4-10 days the grower will watch the plant sprout as the roots go under the ground.

Remember to always wash your hands and have all materials clean to prevent mold.

How to store my seeds?

Cannabis seeds should be stored in a cool, dry place. They can be stored in drawers and cabinets if there is no great temperature variation in these places. They can also be preserved in the refrigerator or even in the freezer.

Rapid temperature variations are the main problem when storing seeds and can harm genetic integrity.

If storing for just a few days or months, the grower can use a Ziploc-type bag, a glass jar, or an airtight container. If you want to keep the seeds preserved for a longer time, the most recommended method is in a closed vacuum package.

If you are going to keep your seeds in the refrigerator, choose a place further away from the door. That way, they suffer less from changes in temperature when opening the refrigerator.

Remember that by freezing your seeds every time they are thawed and refrozen, they become less viable.

By storing your cannabis seeds correctly and properly, they can last up to 10 years.

Special thanks to Sunshine Coast Genetics for helping fact-check this article.

How to Sprout Feminized Autoflower Cannabis Seeds

Growing your own autoflowering cannabis is easy, cost-efficient, and produces fast results. This makes growing autoflowering cannabis a great option for beginners and veteran growers alike. In this article, we discuss the first, crucial stage of growing autoflowering cannabis seeds germination and overview several easy, simple ways to sprout your autoflowering cannabis seeds. As you’ll see, germinating autoflowering cannabis requires little effort and can be achieved in just a matter of days.

Different Methods for Sprouting Autoflowering Cannabis Seeds

Another advantage of growing autoflowering cannabis is the versatility of its growing cycle. There are several different methods you can use to sprout your autoflowering cannabis seeds, all of which are equally effective.

Water

Growers can easily germinate autoflowering cannabis with materials that are readily available in their own homes. One simple method for autoflowering cannabis seed germination is using plain water. To begin, fill a small glass with room-temperature water. If you use water from a tap, you may want to invest in a pH monitor to ensure that the pH of your water does not exceed 7.3.

Next, scoop your autoflowering seeds into a spoon – it is extremely important to handle them delicately–and gently slide them into the glass: the seeds should fall and float on the water’s surface.

Having followed these steps, you can proceed to relocate the cup into a proper environment. Place the cup of water with your seeds in a dark environment (the darker, the better) with an average temperature of 75 to 80 degrees. After completing this step, your work for the germination phase is done; simply leave your seeds undisturbed for two days, and check back to see if they’ve sprouted–if they haven’t, continue to leave them in the same environment until they sprout.

Paper Towel

The “paper towel method” is another easy way to sprout autoflowering seeds with materials that you’ll already have in your home. This method involves using a wet, folded paper towel and a plastic container to sprout your autoflowering cannabis seeds.

This method is easy and produces rapid results. To begin, you’ll need a wet paper towel and a plastic container with a lid.

Begin by cleaning and drying your plastic container to ensure a proper germination environment. Next, fold a paper towel two to three times over, then saturate it with water: though you’ll want your paper towel to be soaked all the way through, it should not be dripping water.

Next, cut two holes in the top of the lid of your container; these perforations will allow excess water to escape the container during germination.

Having done so, place your autoflowering cannabis seeds on the wet paper towel, tucking them between folds to ensure that the seeds are in direct contact with the paper towel on all sides. Proceed to place the folded paper towel with your seeds inside inside of your plastic container, and fasten the lid.

Like any other germination technique for autoflowering cannabis, the paper towel method requires a proper germination environment–and darkness is the most important factor. Store your container in the darkest possible environment. With this, your work is done: simply wait for two days to check on your seeds, which will likely have germinated–if they haven’t, continue to check the container until they sprout.

Starter Cubes

You can also germinate your autoflowering cannabis using seed starter cubes, which are easily obtainable online. Do some research to find the best starter cubes, which you will place knuckle-deep into your soil. Be sure to have your hole ready before you insert your starter cube with your autoflower seeds inside.

Make sure that your cube is moist–if it’s too dry, moisten it slightly with distilled water. Then, gently pick up one of your autoflowering cannabis seeds, and insert it into the the premade hole at the top of the starter cube. Next, insert the starter cube–with the precut hole and autoflower seed facing upwards–into a hole in your soil.

Finally, place a cup overtop of where you inserted your seed starter cube in your soil. Leave the cup in place for at least seven days after you plant your starter cube; this will help retain humidity levels during the germination process. Once your seed has sprouted, you can remove the cup and move into the next phase of the growing cycle.

Though the aforementioned methods are easy and great for beginners, some growers prefer to use soil as a natural medium. This will require specialized resources such as a pH monitor, the correct soil for growing, and a humidity monitor.

To sprout your autoflowering cannabis, begin by moistening your soil and establishing a proper growing environment with an average temperature of 77 degrees. Ensure that pH levels do not exceed 7.3 . Finally, dig a hole of the appropriate depth in the top of your soil, and bury the seed inside.

The Advantages of Autoflowers: Quick, Easy, Methods to Sprout Your Autoflowering Cannabis Seeds Germination

As you can see, sprouting autoflowering seeds is easy and produces rapid results. It is also cost efficient, as many of these methods involve materials that most people already have in their homes. Growing autoflowering cannabis is much faster and easier than growing photoperiod plants; using these easy germination methods, your autoflower seeds will sprout in no time, and with minimal effort. And the easy part doesn’t stop there–every stage of the growing process for autoflowering cannabis is rapid, productive, and easy for all growers, no matter their experience.

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.