Germinate Weed Seeds In Water Cup

ILGM

Buy Cannabis Seeds Online

I was going to just put my seeds in a cup of room temp water to germinate……..But ive read that this is not a good idea, because if the seed is in the… With various methods on how to germinate marijuana seeds for beginner and advanced technique, it all just comes to your preference on what type to use. In this marijuana planting guide, we highlight several of the easiest and most efficient methods for successful marijuana seed germination.

Germinate Seeds in cup of water.

I was going to just put my seeds in a cup of room temp water to germinate. But ive read that this is not a good idea, because if the seed is in the water for over 24hours it gets no oxygen. Causing the seed to not crack open. Has any one had success with this method? It seems like an easier way then the paper towel method

norcaliiguy
Active Member
tea tree
Well-Known Member

THis is the only method I use. I let them soak until I see a long taproot. I used to just wait until I saw a taproot crack, in say 18hours, but the last few seeds I just let go a coupke of days and let these mega taproots grow. I then popped them into rapid rooters and a day later I have advanced seedlings rooted and fine. I am pleased. The paper towel method is bad, it means that little root hairs will get stuck to the paper towel and get stressed or damaged and also their is so much that can go wrong there and the worry over heat and cold is there where as with the cup of water nothing ever goes wrong. Hot or cold it always works.

DoeEyed
Well-Known Member

tea tree, what percentage rate of germination do you get doing that? Have you had any seeds drown doing it this way?

Mdot923
Active Member

THis is the only method I use. I let them soak until I see a long taproot. I used to just wait until I saw a taproot crack, in say 18hours, but the last few seeds I just let go a coupke of days and let these mega taproots grow. I then popped them into rapid rooters and a day later I have advanced seedlings rooted and fine. I am pleased. The paper towel method is bad, it means that little root hairs will get stuck to the paper towel and get stressed or damaged and also their is so much that can go wrong there and the worry over heat and cold is there where as with the cup of water nothing ever goes wrong. Hot or cold it always works.

What is rapid rooters? Im new to growing with seeds sry. Is there a limit to how many i can put in a cup?

bubbastickyfingers
Active Member
tea tree
Well-Known Member

lol, ah a class. I get 100 percent germination this way. I had lost some seeds before using the paper towel or just popping them into media. No paper towel is needed with the cup of water. Just dark. I, in fact use plain tapwater straight from the faucet. Not cold not hot. Then place them in the dark. Traditional knowledge says that when they sink they are ready to go into soil, rapid rooter, rockwool, etc, etc. However, I dont mess with that and simply wait until I thinj the taproot is out far enough for how I feel that day, lol. That simple.

Rapid rooters are a gift from god. Or whoever it is that makes them. Very nice. Google `em. Very cheap and very handy. A coco peat or something material that is meant for hydro or soil. I have used them succesfully 100 percent of the time for both. No lie. They are also the perfect cloning medium.

When a seed has the taproot I use tweezers and place it into a rapid rooter cube or cone. Then I take a little peice of anything handy and gently cover the whole in the rapid rooter cube. The seed needs darl to keep sprouting and take root. After a day or two tops the seed will be poking out. Then just let it go.

Here it gets tricky about half the time. Because the seed does not half to push thru dirt the shell is usually stuck so a little very very very areful nuding is sometimes needed or the plant will die in the shell. It is Very obvious when this happens and what needs to be done and is actually pretty fun to do. SO dont stress. Also I like to put a clear plastic cup over the rapid roooter or the patch of dirt I bury the germed seed to keep the humidity up.

Keep the rapid rooter soaked. Keep the dirt wet too. Whatever you use. Rapid rooters are impossible to overwater. If you sprout in dirt be careful and just wet the the toplaer so as the seed stays moist.

Mdot923
Active Member

lol, ah a class. I get 100 percent germination this way. I had lost some seeds before using the paper towel or just popping them into media. No paper towel is needed with the cup of water. Just dark. I, in fact use plain tapwater straight from the faucet. Not cold not hot. Then place them in the dark. Traditional knowledge says that when they sink they are ready to go into soil, rapid rooter, rockwool, etc, etc. However, I dont mess with that and simply wait until I thinj the taproot is out far enough for how I feel that day, lol. That simple.

Rapid rooters are a gift from god. Or whoever it is that makes them. Very nice. Google `em. Very cheap and very handy. A coco peat or something material that is meant for hydro or soil. I have used them succesfully 100 percent of the time for both. No lie. They are also the perfect cloning medium.

When a seed has the taproot I use tweezers and place it into a rapid rooter cube or cone. Then I take a little peice of anything handy and gently cover the whole in the rapid rooter cube. The seed needs darl to keep sprouting and take root. After a day or two tops the seed will be poking out. Then just let it go.

Here it gets tricky about half the time. Because the seed does not half to push thru dirt the shell is usually stuck so a little very very very areful nuding is sometimes needed or the plant will die in the shell. It is Very obvious when this happens and what needs to be done and is actually pretty fun to do. SO dont stress. Also I like to put a clear plastic cup over the rapid roooter or the patch of dirt I bury the germed seed to keep the humidity up.

See also  Amazon Cannabis Seeds

Keep the rapid rooter soaked. Keep the dirt wet too. Whatever you use. Rapid rooters are impossible to overwater. If you sprout in dirt be careful and just wet the the toplaer so as the seed stays moist.

Germinating Marijuana Seeds in a Water Cup

We have seen many methods of growing marijuana seeds. From the most basic to the advanced technique, cultivating marijuana is a well-loved hobby for beginners and experts alike. With various methods on how to germinate marijuana seeds, it all just comes to your preference on what type to use.

Why You Need to Germinate Marijuana Seeds

Marijuana germination is the procedure where a sprout breaks out of the seed’s coating. The sprout looks like a small white tendril and it is extremely delicate. It is the plant’s initial root and it is often referred to as the “taproot.” All the upcoming roots created by your marijuana plant will grow from the taproot. This means that the taproot is the building block of all your plant’s potential roots in the future.

The taproot, together with a few other tiny young offshoots around it – will grow and develop into longer and stronger roots. They will push the seed above the ground until the shell emerges from the surface of your growing medium and grow its first leaves known as the “cotyledons.”

These initial round leaves will sprout from the inside of the marijuana seed. The cotyledons developed as part of the plant embryo in the seed, which means there’s no need for the marijuana seedling to grow them. The sprouting first leaves are the ones that break open the shell after the taproot cracked it open.

How to germinate marijuana seeds

Marijuana seeds need three things to achieve successful germination and these are heat, water, and air. Using these, you can perform the simplest and easiest technique to germinate your seeds. But first, you’ll need paper towels, two clean plates, and marijuana seeds.

Here’s the process of this germination technique:

  1. Take your paper towels and soak four sheets in the distilled water. The sheets should be saturated with water but they shouldn’t have any excess dripping water.
  2. Get two sheets of the saturated paper towel and place them on one plate. Then, arrange the seeds on top of the plate with at least one inch of space between them. After that, get the remaining sheets of paper and cover it on top of the seeds.
  3. You need to make a dark protected area for your seeds. You can do this by covering the top with the remaining plate. This will create a dome-like space for your seeds to germinate.
  4. Lastly, keep the area warm and follow the correct temperature between 70-90°F.

These are all the steps to germinate your marijuana seeds. Once you completed each step, you only need to wait.

Don’t be impatient because this stage is crucial for the overall growth of your plant. Make sure you check the paper towels from time to time. If the papers are starting to lose their moisture, spray a little amount of water. Maintaining the proper amount of moisture around your seeds will keep them healthy and happy.

Note: each seed has different germination speed. Some may take longer than the others and that’s normal. You can tell that your seed has germinated once it breaks and one sprout begins to emerge from it. This sprout is the taproot of your seeds and it will be its main stem. Once you see the taproot growing from the seeds, that’s the indication that your germination process is successful. By this point, refrain from touching the seed or the taproot since it can disrupt their development.

Proper Way of Transplanting Germinated Marijuana Seeds

When the germination stage passes and your marijuana seeds have grown their taproot, it’s time to transplant them to a growing medium of your choice. Just like how you treat your seeds during germination, you also need to be extremely careful when transplanting your little plants. Remember, they are not yet fully-grown which makes them powerless against stressful factors.

Follow the steps below to properly transplant your germinated marijuana seeds:

  1. Prepare the growing medium in which you will transfer your germinated seeds. You can start with small 2-inch pots since they are cheap and easy to access. What you need to do with the pots is to fill them with coarse and light potting soil. Then, place a hole in the middle, which is at least a quarter-inch down the soil using a pencil or pen.
  2. When your growing medium is ready, it is time to transfer the seeds. Using a pair of tweezers, slowly pick up the seeds and place them in your growing medium, specifically inside the hole. Make sure its taproot is facing downwards. Then, gently cover it with soil.
  3. Next, you need to water the soil using a spray bottle. This will provide moisture in all areas of the soil without the risk of drowning your seeds. Remember that you should only provide sufficient water to your seeds because overwatering them can kill the little sprout.
  4. Lastly, you need to check the moisture level and temperature of the soil to maintain the good condition of your seeds. After a week, you can expect the seedlings to start appearing in your growing medium.

Germinating Marijuana Seeds in a Water Cup

If you want a cool, new method to germinate your seeds, the following has a 100% success rate. Though the results may vary, just like what usually happens to the all-natural growing method, this one is easy which is perfect for first-time growers.

First, you need the following materials before you start:

  • 1 plate
  • a glass of distilled water
  • paper towel
  • tweezers
  • pill bottle

A little reminder before you start with the method is you should always use distilled water.

  1. Never utilize tap water because it carries impurities that might harm your seeds. Lastly, see to it that your germinating space is situated inside an enclosed room that has a temperature of 18 to 25 °C. The following are the steps to follow on how to germinate marijuana seeds in a water cup:
  2. Place your seeds inside a cup or glass of distilled water. Some will instantly drop to the bottom while others will float. Leave them for a few hours until their shell is penetrated with water and then push them to the bottom of the cup/glass using your fingertips. Allow the seeds to soak for 15 – 18 hours. The soaking process will moisten the shell of the seeds which makes it easy for them to germinate.
  3. Get a thick dye-free paper towel and place it on top of a plate. Place the soaked seeds in the paper towel and position them with enough spaces around each other. Fold the paper towel to envelop the seeds.
  4. Place it in a warm and dim area until the seeds start to crack. Make sure the seeds are well-moisturized so check it every 5-12 hours and use a spray bottle to add water onto it.
  5. Be patient. Seeds may take seven days or longer to germinate. Remember that each seed has a different germination phase.
  6. Once the taproot begins to appear, you can transplant your germinated sprouts to your desired growing medium. Make sure the taproot is facing downwards when you plant it.
See also  Growing Weed Seeds In Cotton Balls

Most marijuana seeds take 1 to 2 days to germinate, while others take a week. This depends on the thickness of their shells. Each seed has different features and physical characteristics, hence the difference during the germination process. If you follow all the steps of the germination method we mentioned above, you can expect 80% success rate.

Conclusion

Knowing the right way of germinating your marijuana seeds is vital in starting your weed production. You can choose from all the methods we have provided above. Just make sure that you give your plants everything it needs including food, light, and water. They should also be kept in a growing space with proper levels of humidity and temperature.

Establishing an ideal environment for your plants will help you avoid obstacles along the way. Above all, be organized and precise. Place your seedlings, seeds, and clones in a clear jar and label them. This will help you avoid confusion and expensive mistakes as you learn how to germinate marijuana seeds. Now go and get your pot production going!

How to Germinate Cannabis Seeds

Germination relates to the process of a new plant growing from a seed. It is the first step when adding to your cannabis garden. You can purchase the requisite seeds from a variety of sources. On the downside, it means that cannabis seeds vary enormously in quality. We recommend looking at reputable online seed banks to get your supply. However, please note that there are legal issues to contend with if you buy seeds. This is especially the case if you decide to buy them from a source outside the United States.

When buying seeds, opt for mature options with a dark brown appearance and a firm feel. Once you have them in your possession, make plenty of space for them to grow and thrive. Learning how to germinate weed seeds correctly is crucial to enjoying years of healthy plants and fruitful harvests. In this guide, we outline the ideal germination conditions and show you five different methods.

EDITOR’S CHOICE – Homegrown CannabisCo

Homegrown CannabisCo are the masters when it comes to seeds. Offering a massive variety of cannabis seeds that are well categorized, not only does this company create a resource for superb quality options including feminized seeds, it also provides extensive growing information for those looking for some support along their journey.

Ultimate Guide to Cannabis Seed Germination

In theory, germinating cannabis seeds is a simple affair. They only need three things: Air, water, and heat. The famed ‘paper towel’ method is incredibly easy as long as you follow the steps outlined below. Here is a quick overview of the best germination practices before we show you the various methods.

Water

Be careful not to over-soak your seeds. Hard seeds should be soaked for a maximum of 32 hours, although 24 hours is usually enough. Soaking too long can damage them. Marijuana seeds begin to sprout when they receive the twin signals of water and heat.

Once the right conditions occur, the taproot starts burrowing through the shell of the seed.

If the root breaks through the shell and there is no water, the seedling will die. Keep the roots moist once the seed sprouts, and make sure there is ample moisture at all times.

This is arguably the trickiest aspect of germination. You have to strike a balance between ‘warm’ and ‘hot.’ Spring temperatures are ideal in a ‘normal’ year. While cannabis seeds can germinate in colder weather, the process takes longer. Seedlings also germinate faster when there is plenty of humidity in the air. If you are concerned about low temperatures, invest in incandescent bulbs, and place them over the seed area.

First and foremost, seeds perform at their best when they are left alone! When you check them for the taproot, handle with care! Try to avoid touching the white taproot because it can easily break off.

Planting

You don’t have to plant germinated seeds too deep in the soil, or whatever growing medium you choose. 0.5” – 1” below the surface is plenty. Point the white root downwards into the earth to ensure the seedling is ideally oriented.

Are Your Seeds Good or Bad?

Always opt for dark cannabis seeds as they are the most likely to germinate when kept in the right conditions. White or pale-green seeds have little or no chance of growing.

You may have heard the age-old advice on checking for viable seeds. Apparently, if you can crush seeds between your fingers, they are ‘bad.’ First of all, they won’t be good seeds because you have destroyed them! Secondly, experienced growers know that even flimsy seeds can germinate when exposed to the right conditions.

How to Germinate Marijuana Seeds – 5 Methods

1 – The Paper Towel Method

This is the easiest method and requires cannabis seeds, paper towels, and two clean plates. A word of advice: Choose cheap paper towels because they are non-porous. As a result, you can lay seeds and roots on the surface and not worry about them getting stuck. If you use high-quality paper towels, the roots will grow into them!

It is a simple method, but also a risky one. You could damage the taproot while moving the sprouted seeds, or else the paper could dry out and kill the seeds. In any case, here is the process:

  1. Use up to four sheets of paper towel and soak them in distilled water. While you must soak the sheet, make sure there is no water dripping off.
  2. Place two of the paper sheets on one of the plates. Lay the seeds down at least 1” away from one another. Cover with the other two layers of paper towel.
  3. Cover the seeds with the second plate to lock in moisture. You have created a low-cost dome! Make sure you check the seeds often to see if they have sprouted.
  4. Keep the seeds in a room where the temperature is between 70- and 90-degrees Fahrenheit.
  5. Now you must wait! Seeds typically sprout within 1-4 days, although older seeds often take up to a week.
  6. When checking the seeds, make sure the sheets are saturated. If they are drying out, add more water.
See also  Crop King Marijuana Seeds

You will know that germination has occurred because the seed will split, and a little root appears. Make sure you don’t touch the taproot when it sprouts or during the transplantation process.

EDITOR’S CHOICE – Homegrown CannabisCo

Homegrown CannabisCo are the masters when it comes to seeds. Offering a massive variety of cannabis seeds that are well categorized, not only does this company create a resource for superb quality options including feminized seeds, it also provides extensive growing information for those looking for some support along their journey.

2 – Direct Planting

In nature, a marijuana seed will germinate in the soil and emerge with its taproot growing into the earth. Therefore, you can plant cannabis seeds straight into your growing medium of choice. The main benefit here is that you don’t have to worry about ‘shocking’ the seedling while transporting it.

Your seedling should instantly adjust to the new environment and grow. When using this method, dig a hole 0.5” – 1” deep in soil that is moist but not saturated. Keep things warm with a heating pad or lighting.

3 – Starter Cubes and Seedling Plugs

This has been championed as the easiest germination method. It is effectively a foolproof method. All you have to do is place the seed into the cube/plug and add water. Assuming you put the seeds in a room with the right temperature, germination should occur automatically within a few days. There is a pre-made hole for the seeds, so it is a ‘set it and forget it’ method.

The main downside with this germination method is that such plugs are generally available in packs of 50. Waste is inevitable if you only plan on planting a few cannabis seeds. The plugs dry out in a week or so and become unusable.

You can also use Rockwool cubes as they are cheap and easy to find. However, they are a terrible burden on the environment and bad for your health. Rockwool also has a high pH (which means you must rinse the cubes first) and offers a low cloning and germination success rate.

4 – Overnight Soaking

This is as simple as option #3. It involves nothing more than placing the seeds in a glass of lukewarm water overnight. It is a good idea if you’re using old and hard seeds. The soaking process can breathe new life into them. When you place the seeds in water, they float for a few hours before sinking to the bottom.

The soaking process can breathe new life into old seeds.

If you use a transparent container such as glass, you get to see the white taproot break out! You shouldn’t leave seeds soaking in water for more than 32 hours. Otherwise, seeds that haven’t sprouted yet will drown. If the seeds haven’t germinated by the 32-hour mark, put them in a warm and moist place to complete the process. You should probably use the paper towel method at this point.

5 – A Germination Station

You can purchase a readymade version online. Alternatively, attempt a DIY station by placing a plastic dome over a plate that you then add to a heating pad. Professionally made stations are relatively inexpensive and work rather well. You can buy one for under $40, and their plastic tops ensure better humidity control. With top brands, all you have to do is choose your growing media and plugs to start growing.

Transplanting Germinated Cannabis Seeds

There is no room for a delay once your cannabis seeds have begun to sprout. Now is the time to transfer the seed to its growing medium. Most growers prefer to use small pots, to begin with. Make sure you fill enough pots with loose potting soil and use a pencil to poke a hole around 0.25” deep. Remember, you could break the taproot very easily. Transfer it using tweezers and drop the seed into the hole with the root facing down. Finally, cover it with a thin layer of soil.

For the first few days, use a spray bottle to water the seeds, because adding too much water can drown them. It is worth investing in a pH meter to test the soil regularly and make sure it has enough moisture. If all goes well, the seed should sprout from the earth within a week. If it hasn’t sprouted within ten days, it will probably die.

Turn on your grow light once you have planted the seeds. The heat improves germination rates and speeds up the process of the seedlings opening their first set of leaves. These leaves will remain yellow until exposed to a sufficient level of light in any case. When you plant multiple seeds, you will find that they grow at different rates.

Inevitably, some will fail, while others will flourish. You will have seeds that pop fast and proliferate. Don’t be disappointed if you have a few failures because that’s part and parcel of the growing process. Even when you get everything right, you will inevitably lose a few seeds, and it won’t be your fault!

EDITOR’S CHOICE – Homegrown CannabisCo

Homegrown CannabisCo are the masters when it comes to seeds. Offering a massive variety of cannabis seeds that are well categorized, not only does this company create a resource for superb quality options including feminized seeds, it also provides extensive growing information for those looking for some support along their journey.

How useful was this post?

Click on a star to rate it!

Average rating 4 / 5. Vote count: 1

No votes so far! Be the first to rate this post.