Marijuana Seed Germination Temperature Celsius

ILGM

Buy Cannabis Seeds Online

If you read our recommendations on how to choose the best moment to start your outdoor crop, you have probably waited for the good weather to settle in and for the be… Learn how to successfully germinate your precious cannabis seeds every-time with this simple, easy to follow guide. A must read for all beginners. 1. Germinate hemp seeds directly into soil 2. Activate cannabis seeds with water 3. Germinate cannabis seeds with paper towels – GIF

How to germinate weed seeds?

You can germinate your cannabis seeds both indoors and outdoors, though our recommendation is that you do it indoors, as you will have more control over all the factors that can have a negative effect on the process. But if this is not, below we explain the best way to germinate seeds outdoors.

Our first recommendation, as we already said, would be to wait for the good weather to settle in. Having a high temperature (from 22 to 26°C) is an important factor for your seeds to decide to emerge into the world.

Step 1: protect your seedlings from climate factors and fauna, prevention is better than cure.

Outdoors we never know what dear mother nature has in store for us; in the same way that your seeds might enjoy a week of good weather and sun, there can also be thunderstorms and low temperatures on the very day they sprout. Not to mention the large variety of birds, snails and other fauna that delight in eating those tender and tasty marijuana seedlings. Bear in mind that during their first moments of life, your plants are defenceless against many dangers that threaten them; therefore, it is your job to take care of your little ones and keep them safe. How? It’s actually quite simple, you can buy mini-greenhouses for germinating or you can use a Tupperware and make holes in it for adequate ventilation, although we recommend the first option.

Ventilation is an important factor; don’t make the greenhouse airtight, open the trapdoors to allow adequate ventilation and as the covers are made of thin plastic, you can even make some extra holes if necessary.

Step 2: choose quality materials.

Today you can find high quality products on the market, specifically designed for germination and which, in addition, are not expensive. What do you need?

  • Germination greenhouse
  • Electric blanket: If you live in a very cold area, a good solution to stimulate germination is to place an electric blanket underneath the greenhouse, thus achieving an adequate temperature. It is important that the probe that measures the temperature calculates the temperature of the blanket, and not of the greenhouse, as otherwise you might heat the seeds excessively.
  • Jiffy 7: This product consists of of a compressed and dehydrated substrate pellet which, after leaving it in water for a few minutes, becomes a small sack of special substrate for germinating, and is also biodegradable. This is the star product that will optimise your germination process due to the following reasons:

– On the one hand it has the ideal structure, that is, the amount of air and water in the substrate is adequate for germination.

– It is sterilised, meaning that we prevent the appearance of fungi (powdery mildew, botrytis, etc)

– It has all the elements necessary to nourish your seed/seedling during the first week; the ideal amount of nitrogen, phosphorus, potassium, calcium and magnesium. Phosphorus and calcium are particularly important for the correct development of roots.

– It has a neutral pH, which is the most adequate and makes it the perfect medium for germination; during one week you just have to add water.

– Jiffy 7 is expressly designed for the mega-industrial production of seedlings and does not require fertilisation.

– Another advantage is the specific temperature: water has a low specific temperature. This means that if we place a glassful of water in a room at 25°, it will be very hard for the water to reach that temperature. Therefore, if we place the cannabis seeds in a very watery medium (a glass or between paper towels) the temperature will be lower, while in a Jiffy, as it is more exposed to the air, the temperature will be higher and the process, faster.

However, there are people who germinate marijuana seeds in paper towels. Why don’t we recommend them? Well, although this method may be effective, it is not the most adequate and has some disadvantages. To start with, the seedlings do not receive the necessary light, as the paper towel that covers the top prevents the sun’s rays from penetrating. In turn, in the Jiffy they do receive light, and therefore photosynthesis will start earlier. Another advantage is that as soon as the root emerges in the Jiffy, it starts to turn downwards and to absorb nutrients: on the one hand we accelerate the process and on the other, when we replant the Jiffy 7 with the seedling there is no transplant shock.

See also  Indica Weed Seeds

Step 3: follow the method.

  • Put the Jiffys in lukewarmwater.
  • Once the Jiffys have expanded, make sure that they are thoroughly wet (don’t squeeze them, just remove the excess liquid if they are dripping). Monitor the pH (between 6 and 7) and the EC (less than 0.5 ms) of the water.
  • Insert the seed in the central hole of the Jiffy, not too deep (approximately 5 mm) with the tip pointing upwards. The marijuana plant must not be sown too deep because otherwise the root has to travel too far: it always emerges through the pointy part of the seed, turns 180°, penetrates into the soil, and once it is secure, it raises its “head” from where the cotyledons will grow.
  • Place the Jiffys in the greenhouse as well as a thermo-hygrometer to monitor the temperature and humidity.
  • Temperature control: it must not fall below 20 degrees nor exceed 30. If you put the greenhouse in the sun, it can get very hot; you must constantly monitor the temperature. If it exceeds 25 degrees, we recommend that you lift up the top cover to ventilate it. Another important factor you have to check is humidity. If it is very sunny, the Jiffys will dry up and it is important that they are always humid. You must therefore add water when necessary, though not in excess. They should only be soaking wet during the first two days. After one week we should already have marijuana seedlings; with their two cotyledons (the first two round -shaped leaves), before the first two real leaves sprout (the serrated leaves), transplant them. If they are autoflowering seeds, we recommend that you transplant them to the definitive flower pot, though if they are feminised seeds you can transplant them to a smaller pot and then, when the plants are larger, you can move them to the definitive pot.

For indoors: The same but under a grow light, fluorescent or LED. If you have the option of germinating your cannabis seeds inside your home, ideally the light intensity will be high; the less intense the light, the more the seedlings will stretch in search of light and become spindly. If you use a 400 W light ideally it should be 40-45 cm away.

Now that you know how to take your first steps, you’re ready to start this season’s crop. Have a good harvest!

Author

Kushka Barcelona-born journalist and grower with a curious spirit. I used to spend my life travelling, writing and working with cannabis clubs until Professor OG called me. My two passions, the plant and the writing, have followed the same path ever since. I absolutely love tricky subjects, those that oblige me to spend days buried in books, investigating and driving the entire technical team crazy. There’s no way I can write a story without going into the issue in depth. I enjoy challenges, but even more sharing them with you on our blog. You can find on instagram at @_kushka.

Categories

  • Cannabis activism
  • Hot news
  • Cannabis Genetics
  • Cannabis Growing
  • Growing techniques
  • Trimming techniques
  • Biological prevention
  • Organic Growing
  • Fungi
  • Indoor Growing
  • Outdoor Growing
  • Harvest
  • Grow Reports
  • Nutrients and fertilizers
  • Plagues
  • Medical Cannabis
  • Weed Recipes
  • CBD
  • Risk reduction

Most popular posts

Can marijuana lead to addiction?

Differences between cannabis and hemp

Cannabis types and varieties

Don’t miss any posts!

Subscribe to our newsletter and stay up-to-date with the latests cannabis news.

How to germinate cannabis seeds

When germinating cannabis seeds there are a few factors that play an important role. Cannabis seeds need humidity and warmth to sprout. A temperature between 20 and 25 degrees Celsius is ideal. Also besides that, we recommended that you leave the seeds in peace.

A glass of water

Step 1

Place your seeds in a glass of sterilised water, the water temperature should be around 20 – 25 degrees Celsius. Gently push the seeds with your fingertip below the surface of the water and leave the seeds fo float. After 2 – 4 hours, your seeds should have sunk to the bottom of the glass, if not, Gently push the seeds again, they should fall to the bottom. Within 24 / 48 hours, your seeds will have small roots and be ready for the next stage.

See also  Weed And Seed

Cotton pads – Paper towels

Step 2

Place the seed between 2 wet layers of your chosen material. Using this method, the water will evaporate quickly so it is best to create an environment where condensation can take place. You can do so by placing 2 plates on top of each other with the top one upside down for example. Make sure to check the humidity twice-daily! The material should be humid, not wet!
When the root is longer than 2 – 3cm, its ready for planting.

In soil

Step 3

Choose the size of pot that you will need and fill with a quality soil of your choice. Place your finger into the soil making a small hole in the middle. Carefully transplant the seedling into the soil with the root facing downwards. The seed head should just be covered up by the soil. Wet the soil carefully. Make sure it is wet enough for the seedling to continue growing. Check regularly. The seedling will require 18 hours of light a day in the growing (vegitation) stage.

Seed Storage

We recommend storing your seeds in an airtight plastic bag or container in the fridge. The seeds will stay fresh for years when stored this way.

How to germinate cannabis seeds every time

Learn how to germinate your cannabis seeds successfully every time in our easy to follow guide. Read more

What if my seeds do not germinate?

If your seeds do not germinate for some reason please contact [email protected] for a *free replacement.
*This only applies to seeds bought from this website.”

The best way to germinate cannabis seeds!

With this guide, we would like to explain to you, how to germinate a cannabis seed most successfully. There are three common methods of cannabis seeds to germinate. Properly executed, they will be successful in almost every case.

  1. Germinate hemp seeds directly in soil
  2. Activate cannabis seeds with water
  3. Germinate cannabis seeds in damp cloths

So that cannabis seeds can be germinated under optimal conditions, in all three breeding types, some basic rules have to be considered. Before we describe the methods exactly, we first want to talk about these basics; The first golden rule is for example, not to treat cannabis seeds with bare hands to avoid the chance of contamination with bacteria or fungus. We strongly recommend the use of clean gloves and some disinfected tweezers!

Germinate weed seeds – The quality of the water:

The water temperature should be around 20 degrees and have good quality. The quality of the water can be tested with a PH meter and an EC meter. Recommendation: Osmosis water or drinking water very debil (with little salts and mineral arm).

The ideal substrate to germinate weed seeds:

You can work with different substrates. The most common are earth (light mix), coco and rock wool. Even with the substrates, the soil and ambient temperature should be right. A light mix is specially adapted to sensitive plants such as hemp. Most mixtures contain nutrients and minerals for a few weeks, which the young plant absorbs when it needs them.

For Coco substrate, before working with it, you should test the EC content, as most Coco substrates have a very high value. To lower the value, wash the Coco once with mineral water (osmosis water).

Breeding for coco and rock wool is also referred to as hydroponic cultivation, which means that significantly more air circulation at the roots is created. But the nutrients that are then fed to his plants are more directly absorbed by them. The risk of over or under-fertilization is greater but also the expected yield. Breeding on hydroponics is what gardeners with more experience.

Required air, light, and temperature for germination:

In order not to endanger the germination capacity of the seed, it should be stored in a dark and cool place (6 ° – 10°).

Before the seed is germinated, it must not be exposed to light and the air temperature should not be below 20° C (68° F) nor exceed 30° C (86° F). Maintaining a temperature around 25°C (77° F) is ideal. For outdoor cultivation, it’s recommended to germinate indoors, letting the seedlings grow for a few weeks, and don’t set plants outside too early.

See also  Marijuana Seeds

Method 1. – Germinate hemp seeds in soil

  1. Prepare material (fill small flowerpots with soil).
  2. Lightly moisten the potting soil with good water. (Too much moisture = mold and fungal danger).
  3. Place the seeds in a 0.5cm recess in the center of the pot. Make sure that the seed is transverse and not upright, this can affect the germination rate. Nature has not shaped the seed without reason oval. If you set the seed transverse, it will easily position itself properly in the soil after germination! When you work with jiffies it works something similar. The jiffy is only soaked in water until it swells apart, then the water is expressed again without crushing it until residual moisture is over. At Jiffy, the factory usually prepares a slight depression for the seed.
  4. Lightly cover the seed with soil so that no light can shine directly on the seed. Also with the jiffi one covers the seeds with a little material. Wet but not wet! Now pour no more that could flush the seed back up and the amount of water is also difficult to control.
  5. In case of too little moisture, we recommend wetting the plant with a spray bottle.
  6. Now put the plant in a safe place and depending on the variety and genetics can be expected in the next 36 to 72 hours with a first result. In some cases, it can take up to 6 days.

Method 2. Germinate cannabis seeds in a paper towel.

  1. For preparation, we gonna need two plates, some sheets of kitchen roll, good quality water as described above, and our seeds.
  2. Put two sheets of kitchen paper on one of the plates and moisten them with water.
  3. Put your seeds on the damp cloth and put two more kitchen towels over it.
  4. Moisten also the upper cloths. Runoff excess water that the wipes are only slightly saturated.
  5. Put the second plate on the other plate like a shell.
  6. Store in a dark place and check daily that do not dry out the kitchen towels and of course to see if the seedlings are already broken. Once it is germinated, a small white shoot comes from one side. Now the time has come, the seed can be placed in the substrate of your choice. Carefully remove the seeds with tweezers from the cloths and carefully place them diagonally with the small germ downwards into a prepared hole. Only so deep that the seed is slightly covered with soil (max 5mm).

7. Wait, wait, wait and then be happy.

Method 3. Germinate cannabis seeds in a cup of water

This method is particularly suitable for activating seeds that have been stored for a long time

The addition of hydrogen peroxide is suitable for softening the husk of the hemp seed. About 3 – 5 drops per 100 ml of water are sufficient.

  • Prepare a cup of water at a temperature of about 12 degrees Celsius (54 degrees Fahrenheit).
  • Put the seeds into the water for 12 hours.
  • Prepare to plant the seed in a small flower pot. Exactly as we described in method 1, under point 3.
  • After planting, cover the seed with the substrate and moisten again with water.
  • After about 2 – 3 days, the germ should gradually see daylight.

Cannabis seeds do not germinate? These are the most common mistakes:

  1. The pH of the water is too high or too low. Regardless of the method used to germinate the cannabis seeds, the pH should always be between 5.5 and 6.5.
  2. The EC value of the water is too high, it should be below 0.8.
  3. The water temperature was ignored, it should be between 20 ° and 22 ° celsius.
  4. If you let the hemp seeds germinate into soil, it may be that too much water was used, the soil was fertilized too much, or that the seed was pushed too deep into the soil, or was placed upside down.
  5. The seeds were exposed to strong temperature differences during transport.

This information is only of interest to customers who live in a country where cultivating and cultivating cannabis seeds is not a violation of the law.

How useful was this post?

Click on a star to rate it!

Average rating 4 / 5. Vote count: 1

No votes so far! Be the first to rate this post.